Configurar / Fortigate / USB Modem 3G

Fortigate  / USB Modem 3G

#config system modem
#set status enable

This should get the modem showing up in the GUI

#set phone1 *99#
#set extra-init1 "at+cgdcont=1,\"IP\",\"broadband.windmobile.ca\""

If modem id needs to be added:

First get the USB device ID:

#fnsysctl cat /proc/bus/usb/devices

#config system 3g-modem custom
#edit 1
#set vendor "My Phone Company"
#set model "my phone model"
#set vendor-id "ff55"
#set product-is "88aa"
#end

Enable 4G/LTE:

#config system global
-----#set usb-lte enable
#set wimax-4g-usb enable
#end

Troubleshooting:

#diagnose sys modem detect wireless
#diagnose sys modem external-modem

Outros comandos

#config system modem
#set wireless-port {ttyusb0 | ttyusb1 | ttyusb2}
#end

#config system modem
#set mode standalone
#set auto-dial enable
#set idle-timer 2
#set redial 5
#end

#diagnose sys modem query


---------------------------------

Outra forma

Firstly, ensure that your modem is firmly plugged into a USB Port on the back of the Fortigate, and that you've power-cycled the unit to detect the modem. You'll need to enable the modem with the following command:

config system modem
set status enable
end

Next, try and detect the custom vendor and product IDs with the following command. Be sure to note it down, as you'll need it later!

FortiGate # diagnose sys modem wireless-id
vendor: 0x12d1, product: 0x1003, registered: yes

Next, we'll configure the modem settings in our FortiGate to activate the modem connection:

config system modem
set status enable
set status enable
set dial-on-demand enable
set connect-timeout 30
set wireless-custom-vendor-id 0x12d1
set wireless-custom-product-id 0x1003
set modem-dev1 pcmcia-wireless
set phone1 "*99#"
set username1 "3services" # Set this to your provider's APN
set altmode disable
end 

We're almost there! The last thing to do is to turn on debugging (to watch the progress of the dial), and to actually execute the dial:

diagnose debug enable
diagnose debug application ppp 255
diagnose debug app modemd 255

execute modem dial

Once you're done, don't forget to turn off your logging:

diagnose debug application modemd 0
diagnose debug application ppp 0
diagnose debug disable